IP over Cable Data Network Working R. Woundy Group Comcast Internet-Draft K. Marez Expires: September 2, 2006 Motorola March 1, 2006 Cable Device Management Information Base for Data-Over-Cable Service Interface Specification Compliant Cable Modems and Cable Modem Termination Systems draft-ietf-ipcdn-device-mibv2-11 Status of this Memo By submitting this Internet-Draft, each author represents that any applicable patent or other IPR claims of which he or she is aware have been or will be disclosed, and any of which he or she becomes aware will be disclosed, in accordance with Section 6 of BCP 79. Internet-Drafts are working documents of the Internet Engineering Task Force (IETF), its areas, and its working groups. Note that other groups may also distribute working documents as Internet- Drafts. Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress." The list of current Internet-Drafts can be accessed at http://www.ietf.org/ietf/1id-abstracts.txt. The list of Internet-Draft Shadow Directories can be accessed at http://www.ietf.org/shadow.html. This Internet-Draft will expire on September 2, 2006. Copyright Notice Copyright (C) The Internet Society (2006). Abstract This memo is a revision of the standards track RFC 2669. Please see "Revision Descriptions" below for a description of changes. This document obsoletes RFC 2669. This memo defines a portion of the Management Information Base (MIB) Woundy & Marez Expires September 2, 2006 [Page 1] Internet-Draft DOCSIS Cable Device MIB March 2006 for use with network management protocols in the Internet community. In particular, it defines a basic set of managed objects for SNMP- based management of DOCSIS-compliant Cable Modems and Cable Modem Termination Systems. This memo is a product of the IPCDN working group within the Internet Engineering Task Force. Comments are solicited and should be addressed to the working group's mailing list at ipcdn@ietf.org and/or the author. Table of Contents 1. The Internet-Standard Management Framework . . . . . . . . . . 4 2. Glossary . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.1. CATV . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.2. CM or Cable Modem . . . . . . . . . . . . . . . . . . . . 5 2.3. CMTS or Cable Modem Termination System . . . . . . . . . . 5 2.4. DOCSIS or Data-Over-Cable Service Interface Specification . . . . . . . . . . . . . . . . . . . . . . 5 2.5. Downstream . . . . . . . . . . . . . . . . . . . . . . . . 5 2.6. Head-end . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.7. Media Access Control (MAC) Packet . . . . . . . . . . . . 5 2.8. RF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.9. Simple Network Management Protocol (SNMP) . . . . . . . . 6 2.10. Upstream . . . . . . . . . . . . . . . . . . . . . . . . . 6 3. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 7 3.1. Structure of the MIB . . . . . . . . . . . . . . . . . . . 7 3.1.1. IMPORTed MIB Modules and REFERENCE Clauses . . . . . . 8 3.1.2. Persistence Model for Cable Modems . . . . . . . . . . 8 3.1.3. IPv4 Compliance . . . . . . . . . . . . . . . . . . . 9 3.2. Management requirements . . . . . . . . . . . . . . . . . 9 3.2.1. Handling of Software upgrades . . . . . . . . . . . . 9 3.2.2. Events and Notifications . . . . . . . . . . . . . . . 10 3.2.3. Notification Throttling . . . . . . . . . . . . . . . 10 3.3. Protocol Filters . . . . . . . . . . . . . . . . . . . . . 11 3.3.1. Inbound LLC Filters - docsDevFilterLLCTable . . . . . 12 3.3.2. Special Filters . . . . . . . . . . . . . . . . . . . 13 3.3.3. IP Filtering - docsDevFilterIpTable . . . . . . . . . 14 3.3.4. Outbound LLC Filters . . . . . . . . . . . . . . . . . 15 4. Definitions . . . . . . . . . . . . . . . . . . . . . . . . . 16 5. Acknowledgments . . . . . . . . . . . . . . . . . . . . . . . 81 5.1. Revision Descriptions . . . . . . . . . . . . . . . . . . 81 6. Security Considerations . . . . . . . . . . . . . . . . . . . 83 7. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 87 8. References . . . . . . . . . . . . . . . . . . . . . . . . . . 88 8.1. Normative References . . . . . . . . . . . . . . . . . . . 88 8.2. Informative References . . . . . . . . . . . . . . . . . . 91 Woundy & Marez Expires September 2, 2006 [Page 2] Internet-Draft DOCSIS Cable Device MIB March 2006 Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 92 Intellectual Property and Copyright Statements . . . . . . . . . . 93 Woundy & Marez Expires September 2, 2006 [Page 3] Internet-Draft DOCSIS Cable Device MIB March 2006 1. The Internet-Standard Management Framework For a detailed overview of the documents that describe the current Internet-Standard Management Framework, please refer to section 7 of RFC 3410 [RFC3410]. Managed objects are accessed via a virtual information store, termed the Management Information Base or MIB. MIB objects are generally accessed through the Simple Network Management Protocol (SNMP). Objects in the MIB are defined using the mechanisms defined in the Structure of Management Information (SMI). This memo specifies a MIB module that is compliant to the SMIv2, which is described in STD 58, RFC 2578 [RFC2578], STD 58, RFC 2579 [RFC2579] and STD 58, RFC 2580 [RFC2580]. Woundy & Marez Expires September 2, 2006 [Page 4] Internet-Draft DOCSIS Cable Device MIB March 2006 2. Glossary The terms in this document are derived either from normal cable system usage, or from the documents associated with the Data-Over- Cable Service Interface Specification (DOCSIS) process. 2.1. CATV Originally "Community Antenna Television", now used to refer to any cable or hybrid fiber and cable system used to deliver video signals to a community. 2.2. CM or Cable Modem A CM acts as a "slave" station in a DOCSIS-compliant cable data system. 2.3. CMTS or Cable Modem Termination System A generic term covering a cable bridge or cable router in a head-end. A CMTS acts as the master station in a DOCSIS-compliant cable data system. It is the only station that transmits downstream, and it controls the scheduling of upstream transmissions by its associated CMs. 2.4. DOCSIS or Data-Over-Cable Service Interface Specification "Data-Over-Cable Service Interface Specification". A term referring to the ITU-T Recommendation J.112 [ITU-T_J.112] Annex B standard for cable modem systems. [RFI1.0] [RFI1.1] [RFI2.0] 2.5. Downstream The direction from the head-end towards the subscriber. 2.6. Head-end The origination point in most cable systems of the subscriber video signals. Generally also the location of the CMTS equipment. 2.7. Media Access Control (MAC) Packet A DOCSIS Packet Data Unit. 2.8. RF Radio Frequency. Woundy & Marez Expires September 2, 2006 [Page 5] Internet-Draft DOCSIS Cable Device MIB March 2006 2.9. Simple Network Management Protocol (SNMP) Protocol used for network access to Management Information Base (MIB) objects. The three most commonly used versions are Version 1 (SNMPv1), Version 2 (SNMPv2c) and Version 3 (SNMPv3). 2.10. Upstream The direction from the subscriber towards the head-end. Woundy & Marez Expires September 2, 2006 [Page 6] Internet-Draft DOCSIS Cable Device MIB March 2006 3. Introduction This MIB module provides a set of objects required for the management of DOCSIS-compliant Cable Modems (CM) and Cable Modem Termination Systems (CMTS). The specification is derived from the DOCSIS Radio Frequency Interface specification [RFI1.0]. Please note that the DOCSIS 1.0 standard only required Cable Modems to implement SNMPv1 and to process Internet Protocol Version 4 (IPv4) customer traffic. Design choices in the original version of this MIB module reflected those requirements. DOCSIS 1.1 [RFI1.1] and DOCSIS 2.0 [RFI2.0] require support for SNMPv3, as well as SNMPv1 and SNMPv2c, and the changes in this MIB module over the previous proposed standard version reflect those additional requirements. Future versions of DOCSIS are expected to require support for Internet Protocol Version 6 (IPv6) as both a Customer Premise Equipment (CPE) protocol and one supported by the network elements of the DOCSIS CMTS/CM system. The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. 3.1. Structure of the MIB This MIB module is structured into seven components. A component contains one or more MIB groups related by deprecation or logical extension. o The docsDevBaseGroup extends the MIB-II 'system' group of RFC3418 [RFC3418] with objects needed for cable device system management. Related to this group is the docsDevBaseIgmpGroup (enabling Internet Group Management Protocol (IGMP) status and control) and the docsDevBaseMaxCpeGroup (managing the maximum number of CPEs permitted access through the cable modem). o The docsDevNmAccessGroup and the docsDevNmAccessExtGroup provide a minimum level of SNMP access security (see Section 2.7 of [OSSI1.0], section 2 of [OSSI1.1], and section 5 of [OSSI2.0]). With the completion of the SNMP coexistence document, RFC 3584 [RFC3584], these groups have been deprecated in this version of the MIB. o The docsDevSoftwareGroup, updated by the docsDevSoftwareGroupV2, provides information for network-downloadable software upgrades. See "Handling of Software Upgrades" below. Woundy & Marez Expires September 2, 2006 [Page 7] Internet-Draft DOCSIS Cable Device MIB March 2006 o The docsDevServerGroup, updated by the docsDevServerGroupV2, provides information about the progress of the interaction between the CM or CMTS and various provisioning servers. o The docsDevEventGroup, updated by the docsDevEventGroupV2, provides control and logging for event reporting. With the addition of the SNMP Notification MIB, RFC 3413 [RFC3413], and Notification Log MIB, RFC 3014 [RFC3014], which cover event reporting, the objects in this MIB module have been modified to allow for the usage of these RFCs. o The docsDevFilterGroup configures filters at link layer and IP layer for bridged data traffic. This group has been deprecated in this version of the MIB in favor of the docsDevFilterLLCGroup, and by groups from the Differentiated Services MIB [RFC3289] -- specifically the groups representing the Data Path, Classifier, and Actions tables from that MIB. o The docsDevCpeGroup, updated by the docsDevInetCpeGroup, provides control over which IP addresses may be used by CPEs (e.g. PCs) serviced by a given cable modem. This provides anti-spoofing control at the point of origin for a large cable modem system. This group is separate from docsDevFilter primarily as this group is only implemented on the Cable Modem (CM) and MUST NOT be implemented on the Cable Modem Termination System (CMTS). 3.1.1. IMPORTed MIB Modules and REFERENCE Clauses This MIB module IMPORTs definitions normatively from the following MIB modules, beyond [RFC2578], [RFC2579] and [RFC2580]: INET-ADDRESS- MIB [RFC4001], SNMP-FRAMEWORK-MIB [RFC3411], IF-MIB [RFC2863], RMON2- MIB [RFC2021], and DIFFSERV-MIB [RFC3289]. This MIB module also includes REFERENCE clauses that normatively refer to [RFC3617], [RFI1.0], [RFI1.1], [RFI2.0], [OSSI1.1], and [OSSI2.0]. 3.1.2. Persistence Model for Cable Modems Most of the tables in this MIB module (e.g. docsDevNmAccessTable, docsDevFilterLLCTable) are specified not to persist objects across reboots. The expectation (and current operational practice) is that upon reboot, these tables are cleared and repopulated from the DOCSIS configuration file supplied by the cable operator. This approach enables a cable modem to adapt to the current cable operator's environment, which in turn enables cable modem portability across Woundy & Marez Expires September 2, 2006 [Page 8] Internet-Draft DOCSIS Cable Device MIB March 2006 different cable operators. A notable exception to the persistence model is docsDevEventTable, since it is useful to maintain a record of events across reboots for debugging purposes. 3.1.3. IPv4 Compliance Please note that the compliance statements in this version of the MIB module require support only for IPv4 addresses. That is because the current version of the DOCSIS protocols (1.0, 1.1, and 2.0) are not IPv6-capable. Although support for IPv6 will require changes to the DOCSIS protocols, it is expected that the only changes needed to the MIB module itself will be the addition of new compliance statements that mandate support for IPv6 addresses. 3.2. Management requirements 3.2.1. Handling of Software upgrades The Cable Modem software upgrade process is documented in [RFI1.0]. From a network management station, the operator: o sets docsDevSwServer to the address of the Trivial File Transfer Protocol (TFTP) server for software upgrades o sets docsDevSwFilename to the file pathname of the software upgrade image o sets docsDevSwAdminStatus to upgrade-from-mgt While DOCSIS only specifies the implementation of the TFTP protocol [RFC1350] for file transfers, other functional entities embedded within the cable device (particularly a PacketCable Multimedia Terminal Adapter [MTA-PROV]) specify the optional implementation of the Hyper Text Transfer Protocol (HTTP) [RFC1945][RFC2616] for file transfers. The value of the docsDevSwServerTransportProtocol object determines which protocol is used for SNMP-initiated software upgrade. One reason for the SNMP-initiated upgrade is to allow loading of a temporary software image (e.g., special diagnostic software) that differs from the software normally used on that device without changing the provisioning database. Note that software upgrades should not be accepted blindly by the cable device. The cable device may refuse an upgrade if: Woundy & Marez Expires September 2, 2006 [Page 9] Internet-Draft DOCSIS Cable Device MIB March 2006 o The download is incomplete. o The file contents are incomplete or damaged. o The software is not intended for that hardware device (may include the case of a feature set that has not been purchased for this device). A cable device that implements the code verification mechanisms of [BPIPLUS] verifies the source and integrity of the downloaded image by validating one or more Code Verification Signatures that are bundled within the software upgrade. 3.2.2. Events and Notifications This MIB module provides control facilities for reporting events through syslog [RFC3164], notifications (traps and informs), and non- volatile logging. Additional controls allow for the agent to use the SNMP Notification MIB [RFC3413] and Notification Log MIB [RFC3014] for event notification. The conventions for event reporting are outside the scope of this document. The definition and coding of common DOCSIS notifications can be found in [I-D.ietf-ipcdn-docsisevent-mib]. 3.2.3. Notification Throttling The CM and CMTS MUST provide support for notification message throttling as described below. The network operator can employ notification rate throttling or notification limiting by manipulating the appropriate MIB variables. 3.2.3.1. Notification rate throttling Network operators may employ either of two rate control methods. In the first method, the device ceases to send notifications when the rate exceeds the specified maximum message rate. It resumes sending notifications only if reactivated by a network management station request. In the second method, the device resumes sending notifications when the rate falls below the specified maximum message rate. The network operator configures the specified maximum message rate by setting the measurement interval (in seconds), and the maximum number of notifications to be transmitted within the measurement interval. The operator can query the operational throttling state (to determine whether notifications are enabled or blocked by throttling) of the Woundy & Marez Expires September 2, 2006 [Page 10] Internet-Draft DOCSIS Cable Device MIB March 2006 device, as well as query and set the administrative throttling state (to manage the rate control method) of the device. 3.2.3.2. Limiting the notification rate Network operators may wish to limit the number of notifications sent by a device over a specified time period. The device ceases to send notifications when the number of notifications exceeds the specified threshold. It resumes sending notifications only when the measurement interval has passed. The network operator defines the maximum number of notifications he is willing to handle and sets the measurement interval to a large number (in hundredths of a second). For this case, the administrative throttling state is set to stop at threshold which is the maximum number of notifications. See "Techniques for Managing Asynchronously Generated Alerts" [RFC1224] for additional technical motivations. 3.3. Protocol Filters The Cable Device MIB provides objects for both Link Layer Control (LLC) and IP protocol filters. The LLC protocol filter entries can be used to limit CM forwarding to a restricted set of network-layer protocols (such as IP, Internetwork Packet Exchange (IPX), Network Basic Input/Output System (NetBIOS), and Appletalk). The IP protocol filter entries can be used to restrict upstream or downstream traffic based on source and destination IP addresses, transport-layer protocols (such as Transport Control Protocol (TCP), User Datagram Protocol (UDP), and Internet Control Message Protocol (ICMP)), and source and destination TCP/UDP port numbers. In general, a cable modem applies filters (or more properly, classifiers) in an order appropriate to the layering model. Specifically, the inbound MAC (or LLC) layer filters are applied first, then the "special" filters, then the IP layer inbound filters, then the IP layer outbound filters, then any final LLC outbound filters. Woundy & Marez Expires September 2, 2006 [Page 11] Internet-Draft DOCSIS Cable Device MIB March 2006 ***************** * LLC Filter In * ***************** | v ******************* * Special Filters * * | * * V * * ************ * * * IP Spoof * * * ************ * * | * * v * * *************** * * * SNMP Access * * * *************** * * | * ******************* | v **************** * IP Filter In * **************** | v ***************** * IP Filter Out * ***************** | v ****************** * LLC Filter Out * ****************** 3.3.1. Inbound LLC Filters - docsDevFilterLLCTable The inbound LLC (or MAC or level-2) filters are contained in the docsDevFilterLLCTable and are applied to level-2 frames entering the cable modem from either the RF MAC interface or from one of the CPE interfaces (physical or logical). These filters are used to prohibit the processing and forwarding of certain types of level-2 traffic that may be disruptive to the network. The filters, as currently specified, can be set to cause the modem to either drop frames which match at least one filter, or to process a frame which matches at least one filter. Some examples of possible configurations would be to only permit IP (and ARP) traffic, or to drop NetBIOS traffic. Woundy & Marez Expires September 2, 2006 [Page 12] Internet-Draft DOCSIS Cable Device MIB March 2006 3.3.2. Special Filters Special filters are applied after the packet is accepted from the MAC layer by the IP module, but before any other processing is done. They are filters that apply only to a very specific class of traffic. 3.3.2.1. IP Spoofing Filters - docsDevCpeTable, docsDevCpeInetTable IP spoofing filters are applied to packets entering the modem from one of the CPE interfaces and are intended to prevent a subscriber from stealing or mis-using IP addresses that were not assigned to the subscriber. If the filters are active (enabled), the source address of the IP packet must match at least one IP address in one of these two tables (docsDevCpeTable or docsDevCpeInetTable) or it is discarded without further processing. To prevent potential implementation ambiguity, the device consults the docsDevCpeTable for the IP packet source address, before consulting the docsDevCpeInetTable. The table can be automatically populated where the first N different IP addresses seen from the CPE side of the cable modem are used to automatically populate the table. The spoofing filters are specified in the docsDevCpeTable and the docsDevCpeInetTable, and the policy for automatically creating filters in those tables is controlled by docsDevCpeEnroll and docsDevMaxCpe as well as the network management agent. Similar IP spoofing filter controls are defined for CMTS implementation in the Subscriber Management MIB [RFC4036]. 3.3.2.2. SNMP Access Filters - docsDevNmAccessTable The SNMP access filters are applied to SNMP packets entering from any interface and destined for the cable modem. If the packets enter from a CPE interface, the SNMP filters are applied after the IP spoofing filters. The filters only apply to SNMPv1 or SNMPv2c traffic, and are not consulted for SNMPv3 traffic (and need not be implemented by a v3 only agent). SNMPv3 access control is specified in the User Security Model MIB in [RFC3414]. With the completion of the SNMP coexistence document, RFC 3584 [RFC3584], docsDevNmAccess table has been deprecated in this version of the MIB. See the body of the MIB for the description of how agents should handle the interaction between RFC 3584 MIBs and this MIB. Woundy & Marez Expires September 2, 2006 [Page 13] Internet-Draft DOCSIS Cable Device MIB March 2006 3.3.3. IP Filtering - docsDevFilterIpTable The IP Filtering table acts as a classifier table. Each row in the table describes a template against which IP packets are compared. The template includes source and destination addresses (and their associated masks), upper level protocol (e.g. TCP, UDP), source and destination port ranges, and Terms of Service (ToS) values. A row also contains interface and traffic direction match values which have to be considered in combination. All columns of a particular row must match the appropriate fields in the packet, and must match the interface and direction items for the packet to result in a match to the packet. When classifying a packet, each table is scanned beginning with the lowest number filter. If the agent finds a match, it applies the group of policies specified. If the matched filter has the continue bit set, the agent continues the scan possibly matching additional filters and applying additional policies. For example, this allows the agent to take one set of actions for the 24.0.16/255.255.255.0 group and one set of actions for telnet packets to/from 24.0.16.30, and these sets of actions may not be mutually exclusive. Once a packet is matched, one of three actions happen based on the setting of docsDevFilterIpControl in the row. The packet may be dropped, in which case no further processing is required. The packet may be accepted and processing of the packet continues. Lastly, the packet may have a set of policy actions applied to it. If docsDevFilterIpContinue is set to true, scanning of the table continues and additional matches may result. When a packet matches, and docsDevFilterIpControl in the filter matched is set to 'policy', the value of docsDevFilterIpPolicyId is used as a selector into the docsDevFilterPolicyTable. The first level of indirection may result in zero or more actions being taken based on the match. The docsDevFilterPolicyTable is scanned in row order and all rows where docsDevFilterPolicyId equals docsDevFilterIpPolicyId have the action specified by docsDevFilterPolicyValue 'executed'. For an example of the use of these IP Filtering MIB tables, see [RFC2669]. The IP Filtering table and related tables have been deprecated in this version of the MIB in favor of the Data Path, Classifier, and Action tables from the Differentiated Services MIB [RFC3289]. See the body of the MIB for the description of how agents should handle the interaction between RFC 3289 MIBs and this MIB module. Woundy & Marez Expires September 2, 2006 [Page 14] Internet-Draft DOCSIS Cable Device MIB March 2006 3.3.4. Outbound LLC Filters Lastly, any outbound LLC filters are applied to the packet just prior to it being emitted on the appropriate interface. This MIB module does not specify any outbound LLC filters, but section 3 of the DOCSIS Quality of Service (QoS) MIB, [RFC4323], includes outbound LLC filtering requirements. Woundy & Marez Expires September 2, 2006 [Page 15] Internet-Draft DOCSIS Cable Device MIB March 2006 4. Definitions DOCS-CABLE-DEVICE-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, IpAddress, Unsigned32, Counter32, Integer32, zeroDotZero, mib-2 FROM SNMPv2-SMI -- RFC 2578 RowStatus, RowPointer, DateAndTime, TruthValue, StorageType FROM SNMPv2-TC -- RFC 2579 InetAddressType, InetAddress FROM INET-ADDRESS-MIB -- RFC 4001 OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF -- RFC 2580 SnmpAdminString FROM SNMP-FRAMEWORK-MIB -- RFC 3411 InterfaceIndexOrZero FROM IF-MIB -- RFC 2863 ZeroBasedCounter32 FROM RMON2-MIB -- RFC 2021 diffServMIBDataPathGroup, diffServMIBClfrGroup, diffServMIBClfrElementGroup, diffServMIBMultiFieldClfrGroup, diffServMIBActionGroup, diffServMIBDscpMarkActGroup, diffServMIBCounterGroup, diffServMIBAlgDropGroup, diffServDataPathStatus, diffServClfrStatus, diffServClfrElementStatus, diffServMultiFieldClfrAddrType, diffServMultiFieldClfrSrcAddr, diffServMultiFieldClfrDstAddr, diffServAlgDropStatus, diffServDataPathStorage, Woundy & Marez Expires September 2, 2006 [Page 16] Internet-Draft DOCSIS Cable Device MIB March 2006 diffServClfrStorage, diffServClfrElementStorage, diffServMultiFieldClfrStorage, diffServActionStorage, diffServCountActStorage, diffServAlgDropStorage, diffServAlgDropType FROM DIFFSERV-MIB; -- RFC 3289 docsDev MODULE-IDENTITY LAST-UPDATED "200603010000Z" -- March 1, 2006 ORGANIZATION "IETF IP over Cable Data Network Working Group" CONTACT-INFO " Rich Woundy Postal: Comcast Cable 27 Industrial Avenue Chelmsford, MA 01824 U.S.A. Phone: +1 978 244 4010 E-mail: richard_woundy@cable.comcast.com Kevin Marez Postal: Motorola Corporation 6450 Sequence Drive San Diego, CA 92121 U.S.A. Phone: +1 858 404 3785 E-mail: kevin.marez@motorola.com IETF IPCDN Working Group General Discussion: ipcdn@ietf.org Subscribe: http://www.ietf.org/mailman/listinfo/ipcdn Archive: ftp://ftp.ietf.org/ietf-mail-archive/ipcdn Co-chairs: Richard Woundy, richard_woundy@cable.comcast.com Jean-Francois Mule, jf.mule@cablelabs.com" DESCRIPTION "This is the MIB Module for DOCSIS-compliant cable modems and cable-modem termination systems. Copyright (C) The Internet Society (2006). This version of this MIB module was published in RFC XXXX; for full legal notices see the RFC itself." -- RFC Editor Note: The descriptions (above and below) -- should be modified to -- change XXXX to the actual RFC number that is -- assigned at publication. This note should -- be removed at that time as well. Woundy & Marez Expires September 2, 2006 [Page 17] Internet-Draft DOCSIS Cable Device MIB March 2006 REVISION "200603010000Z" -- March 1, 2006 DESCRIPTION "Second version, published as RFC XXXX. Modifications to this MIB module since RFC 2669 include: - Deprecation of the docsDevFilter group in favor of the DiffServ MIB groups, to enable support for IPv6 filtering and DiffServ Code Point (DSCP) marking. - Deprecation of the docsDevCpeGroup in favor of the docsDevCpeInetGroup, to enable support of IPv6. - Addition of various InetAddress objects to enable support of IPv6. - Deprecation of docsDevNmAccessTable in favor of SNMP Coexistence and SNMPv3 -- yet adding docsDevNmAccessTrapVersion and clarifying docsDevNmAccessIp for current use of this table, - Addition of docsDevIgmpModeControl for management and control of the IGMP mode of operation, - Addition of docsDevMaxCpe for management of the maxium number of CPEs permitted access through a cable modem, - Addition of docsDevSwServerTransportProtocol, and modifications to docsDevSoftware object DESCRIPTIONS, to enable software downloads via either TFTP or HTTP, - Replacement of docsDevEvThrottleInhibited with docsDevEvThrottleThresholdExceeded to simplify event threshold management, - Modification of docsDevEvReporting to enable local logging to the internal volatile log, and not to the internal non-volatile log, - Modification of the compliance statement to make the docsDevCpe objects optional - Created placeholders for two OIDs in the docsDevFilterPolicyTable that were never used - Modified the DESCRIPTION of docsDevSwServerTransportProtocol and docsDevSwServerAddressType to address the dependence between each object - Added a reference to docsDevServerConfigTftpAddress - Clarified the scope of notifications that are covered by docsDevEvThrottleThreshold - Clarified an error condition that could occur when doing a SET to docsDevEvReporting - Defined each of the enumerated types for both docsDevEvLevel and docsDevEvPriority - Added UNITS clause to docsDevFilterLLCMatches, docsDevFilterIpMatches, docsDevMaxCpe, docsDevEvThrottleThreshold and docsDevEvCounts. Woundy & Marez Expires September 2, 2006 [Page 18] Internet-Draft DOCSIS Cable Device MIB March 2006 - Added REFERENCE clause to docsDevFilterIpProtocol - Modified DESCRIPTION of docsDevCpeInetAddr to be more protocol-neutral - Removed the enumerated value (1) from both docsDevCpeInetSource and docsDevCpeSource - Covered additional read-write and read-create objects in the Security Considerations section - Modified the default value of docsDevNmAccessIpMask to be consistent with OSSI specification - Modified the SYNTAX of docsDevNmAccessCommunity and docsDevNmAccessInterfaces in the Conformance Statement section - Added SYNTAX clause to docsDevEvReporting in the Conformance Statement section - Modified SYNTAX clause of docsDevEvReporting to move new enumerated type to byte boundary - Added references to DOCSIS 2.0 specifications to multiple objects - Clarified non-persistency across reboots for all tables - Clarified functionality of docsDevSw objects as they relate to docsDevSwOperStatus - Clarified enumerated types (9) and (10) for docsDevServerBootState - Defined the state of unknown(0) for the following objects: docsDevServerDhcpAddressType, docsDevServerTimeAddressType, docsDevServerConfigTftpAddressType and docsDevServerConfigTftpAddressType - Modified the value in docsDevFilterIpDaddr to be consistent with the SYNTAX - Specified which rows could be modified in an active row for docsDevFilterPolicyStatus - Defined the term 'manually' in docsDevCpeEnroll - Clarified the description for docsDevFilterTosOrMask - Covered the case of a non-existent row for docsDevFilterPolicyPtr - Added DEFVAL clauses for multiple objects - Replaced docsDevNotification OBJECT IDENTIFIER with docsDevNotifications to address possible compatibility issues - Added support for the usage of RFC 3413 and RFC 3014 as event notification mechanisms - Removed docsDevFilterPolicyObsoleteGroup - Added stdInterface(9) type to docsDevEvReporting to support the usage of RFC3413 and RFC3014 - Modified DESCRIPTION for docsDevMaxCpe" Woundy & Marez Expires September 2, 2006 [Page 19] Internet-Draft DOCSIS Cable Device MIB March 2006 REVISION "199908190000Z" DESCRIPTION "Initial version, published as RFC 2669." ::= { mib-2 69 } docsDevMIBObjects OBJECT IDENTIFIER ::= { docsDev 1 } docsDevBase OBJECT IDENTIFIER ::= { docsDevMIBObjects 1 } -- -- For the following object, there is no concept in the -- RFI specification corresponding to a backup CMTS. The -- enumeration is provided here in case someone is able -- to define such a role or device. -- docsDevRole OBJECT-TYPE SYNTAX INTEGER { cm(1), cmtsActive(2), cmtsBackup(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Defines the current role of this device. cm(1) is a Cable Modem, cmtsActive(2) is a Cable Modem Termination System which is controlling the system of cable modems, and cmtsBackup(3) is a CMTS which is currently connected but not controlling the system (not currently used). In general, if this device is a 'cm', its role will not change during operation or between reboots. If the device is a 'cmts' it may change between cmtsActive and cmtsBackup and back again during normal operation. NB: At this time, the DOCSIS standards do not support the concept of a backup CMTS, but cmtsBackup is included for completeness." ::= { docsDevBase 1 } docsDevDateTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-write STATUS current DESCRIPTION "The current date and time, with time zone information (if known). Woundy & Marez Expires September 2, 2006 [Page 20] Internet-Draft DOCSIS Cable Device MIB March 2006 If the real data and time cannot be determined, this shall represent elapsed time from boot relative to the standard epoch '1970-1-1,0:0:0.0'. In other words, if this agent has been up for 3 minutes, and not been able to determine what the actual date and time are, this object will return the value '1970-1-1,0:03:0.0'." ::= { docsDevBase 2 } docsDevResetNow OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to true(1) causes the device to reset. Reading this object always returns false(2)." ::= { docsDevBase 3 } docsDevSerialNumber OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The manufacturer's serial number for this device." ::= { docsDevBase 4 } docsDevSTPControl OBJECT-TYPE SYNTAX INTEGER { stEnabled(1), noStFilterBpdu(2), noStPassBpdu(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls operation of the spanning tree protocol (as distinguished from transparent bridging). If set to stEnabled(1) then the spanning tree protocol is enabled, subject to bridging constraints. If noStFilterBpdu(2), then spanning tree is not active, and Bridge PDUs received are discarded. If noStPassBpdu(3) then spanning tree is not active and Bridge PDUs are transparently forwarded. Note that a device need not implement all of these Woundy & Marez Expires September 2, 2006 [Page 21] Internet-Draft DOCSIS Cable Device MIB March 2006 options, but that noStFilterBpdu(2) is required." DEFVAL { noStFilterBpdu } ::= { docsDevBase 5 } docsDevIgmpModeControl OBJECT-TYPE SYNTAX INTEGER { passive(1), active(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the IGMP mode of operation for the CM or CMTS. In passive mode, the device forwards IGMP between interfaces based on knowledge of Multicast Session activity on the subscriber side interface and the rules defined in the DOCSIS RFI specification. In active mode, the device terminates at and initiates IGMP through its interfaces based on the knowledge of Multicast Session activity on the subscriber side interface." REFERENCE "DOCSIS RFI 1.1 Specification, Section 3.3.1. and DOCSIS RFI 2.0 Specification, Section 5.3.1." DEFVAL { passive } ::= { docsDevBase 6 } docsDevMaxCpe OBJECT-TYPE SYNTAX Unsigned32 (0..255) UNITS "CPEs" MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of CPEs that can be granted access through a CM during a CM epoch. This value can be obtained from the CM configuration file, however, it may be adjusted by the CM based on hardware or software limitations that have been imposed on the implementation." REFERENCE "DOCSIS RFI 1.0 Specification, Appendix C.7.20., and DOCSIS RFI 1.1 Specification, Appendix C.1.1.7. and DOCSIS RFI 2.0 Specification, Appendix C.1.1.7." ::= { docsDevBase 7 } -- -- The following table provides one level of security for access Woundy & Marez Expires September 2, 2006 [Page 22] Internet-Draft DOCSIS Cable Device MIB March 2006 -- to the device by network management stations. -- Note that access is also constrained by the -- community strings and any vendor-specific security. -- docsDevNmAccessTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsDevNmAccessEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table controls access to SNMP objects by network management stations. If the table is empty, access to SNMP objects is unrestricted. The objects in this table MUST NOT persist across reboots. The objects in this table are only accessible from cable devices which are not capable of operating in SNMP Coexistence mode (RFC 3584) nor in SNMPv3 mode (RFC 3410). See the conformance section for details. Note that some devices are required by other specifications, e.g. the DOCSIS OSSIv1.1 specification, to support the legacy SNMPv1/v2c docsDevNmAccess mode for backward compatibility. This table is deprecated. Instead, use the SNMP coexistence MIBs from RFC 3584, the TARGET and NOTIFICATION MIBs from RFC 3413, and the View-Based Access Control Model (VACM) MIBs for all SNMP protocol versions from RFC 3415." ::= { docsDevMIBObjects 2 } docsDevNmAccessEntry OBJECT-TYPE SYNTAX DocsDevNmAccessEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry describing access to SNMP objects by a particular network management station. An entry in this table is not readable unless the management station has read-write permission (either implicit if the table is empty, or explicit through an entry in this table. Entries are ordered by docsDevNmAccessIndex. The first matching entry (e.g. matching IP address and community string) is used to derive access." INDEX { docsDevNmAccessIndex } ::= { docsDevNmAccessTable 1 } DocsDevNmAccessEntry ::= SEQUENCE { docsDevNmAccessIndex Integer32, Woundy & Marez Expires September 2, 2006 [Page 23] Internet-Draft DOCSIS Cable Device MIB March 2006 docsDevNmAccessIp IpAddress, docsDevNmAccessIpMask IpAddress, docsDevNmAccessCommunity OCTET STRING, docsDevNmAccessControl INTEGER, docsDevNmAccessInterfaces OCTET STRING, docsDevNmAccessStatus RowStatus, docsDevNmAccessTrapVersion INTEGER } docsDevNmAccessIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Index used to order the application of access entries." ::= { docsDevNmAccessEntry 1 } docsDevNmAccessIp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The IP address (or subnet) of the network management station. The address 0.0.0.0 is defined to mean any Network Management Station (NMS). If traps are enabled for this entry, then the value must be the address of a specific device. Implementations MAY recognize 255.255.255.255 as equivalent to 0.0.0.0." DEFVAL { '00000000'h } ::= { docsDevNmAccessEntry 2 } docsDevNmAccessIpMask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The IP subnet mask of the network management stations. If traps are enabled for this entry, then the value must be 0.0.0.0. Implementations MAY recognize 255.255.255.255 as equivalent to 0.0.0.0." DEFVAL { '00000000'h } ::= { docsDevNmAccessEntry 3 } docsDevNmAccessCommunity OBJECT-TYPE SYNTAX OCTET STRING MAX-ACCESS read-create STATUS deprecated Woundy & Marez Expires September 2, 2006 [Page 24] Internet-Draft DOCSIS Cable Device MIB March 2006 DESCRIPTION "The community string to be matched for access by this entry. If set to a zero length string then any community string will match. When read, this object SHOULD return a zero length string." DEFVAL { "public" } ::= { docsDevNmAccessEntry 4 } docsDevNmAccessControl OBJECT-TYPE SYNTAX INTEGER { none(1), read(2), readWrite(3), roWithTraps(4), rwWithTraps(5), trapsOnly(6) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Specifies the type of access allowed to this NMS. Setting this object to none(1) causes the table entry to be destroyed. Read(2) allows access by 'get' and 'get-next' PDUs. ReadWrite(3) allows access by 'set' as well. RoWithtraps(4), rwWithTraps(5), and trapsOnly(6) control distribution of Trap PDUs transmitted by this device." DEFVAL { read } ::= { docsDevNmAccessEntry 5 } -- The syntax of the following object was copied from RFC 1493, -- dot1dStaticAllowedToGoTo. docsDevNmAccessInterfaces OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1..32)) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Specifies the set of interfaces from which requests from this NMS will be accepted. Each octet within the value of this object specifies a set of eight interfaces, with the first octet specifying ports 1 through 8, the second octet specifying interfaces 9 through 16, etc. Within each octet, the most significant bit represents the lowest numbered interface, and the least significant bit represents the highest numbered interface. Thus, each interface is represented by a single bit within the value of this Woundy & Marez Expires September 2, 2006 [Page 25] Internet-Draft DOCSIS Cable Device MIB March 2006 object. If that bit has a value of '1' then that interface is included in the set. Note that entries in this table apply only to link-layer interfaces (e.g., Ethernet and CATV MAC). Bits representing upstream and downstream channel interfaces MUST NOT be set to '1'. Note that if bits corresponding to non-existing interfaces are set, the result is implementation specific. Note that according to the DOCSIS OSSIv1.1 specification, when ifIndex '1' is included in the set, then this row applies to all CPE (customer-facing) interfaces. The size of this object is the minimum required to represent all configured interfaces for this device." ::= { docsDevNmAccessEntry 6 } docsDevNmAccessStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Controls and reflects the status of rows in this table. Rows in this table may be created by either the create-and-go or create-and-wait paradigms. There is no restriction on changing values in a row of this table while the row is active. The following objects MUST have valid values before this object can be set to active: docsDevNmAccessIp, docsDevNmAccessStatus, docsDevNmAccessIpMask, docsDevNmAccessCommunity, docsDevNmAccessControl and docsDevNmAccessInterfaces." ::= { docsDevNmAccessEntry 7 } docsDevNmAccessTrapVersion OBJECT-TYPE SYNTAX INTEGER { disableSNMPv2trap(1), enableSNMPv2trap(2) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Specifies the TRAP version that is sent to this NMS. Woundy & Marez Expires September 2, 2006 [Page 26] Internet-Draft DOCSIS Cable Device MIB March 2006 Setting this object to disableSNMPv2trap (1) causes the trap in SNMPv1 format to be sent to particular NMS. Setting this object to enableSNMPv2trap (2) causes the trap in SNMPv2 format be sent to particular NMS." DEFVAL { disableSNMPv2trap } ::= { docsDevNmAccessEntry 8 } -- -- The following group describes control objects used for downloading -- firmware to a cable device. Procedures for software download are -- described in section 3.2.1 of the RFC containing this MIB module. -- docsDevSoftware OBJECT IDENTIFIER ::= { docsDevMIBObjects 3 } docsDevSwServer OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The address of the TFTP server used for software upgrades. If the TFTP server is unknown or is a non-IPv4 address, return 0.0.0.0. This object is deprecated. See docsDevSwServerAddress for its replacement. This object will have its value modified given a valid SET to docsDevSwServerAddress." ::= { docsDevSoftware 1 } docsDevSwFilename OBJECT-TYPE SYNTAX SnmpAdminString (SIZE (0..64)) MAX-ACCESS read-write STATUS current DESCRIPTION "The filename of the software image to be downloaded via TFTP, or the abs_path (as defined in RFC 2616) of the software image to be downloaded via HTTP. Unless set via SNMP, this is the filename or abs_path specified by the provisioning server during the boot process, that corresponds to the software version that is desired for this device. If unknown, the value of this object is the zero-length string." ::= { docsDevSoftware 2 } Woundy & Marez Expires September 2, 2006 [Page 27] Internet-Draft DOCSIS Cable Device MIB March 2006 docsDevSwAdminStatus OBJECT-TYPE SYNTAX INTEGER { upgradeFromMgt(1), allowProvisioningUpgrade(2), ignoreProvisioningUpgrade(3) } MAX-ACCESS read-write STATUS current DESCRIPTION "If set to upgradeFromMgt(1), the device will initiate a TFTP or HTTP software image download. After successfully receiving an image, the device will set its state to ignoreProvisioningUpgrade(3) and reboot. If the download process is interrupted (e.g. by a reset or power failure, the device will load the previous image and, after re-initialization, continue to attempt loading the image specified in docsDevSwFilename. If set to allowProvisioningUpgrade(2), the device will use the software version information supplied by the provisioning server when next rebooting (this does not cause a reboot). When set to ignoreProvisioningUpgrade(3), the device will disregard software image upgrade information from the provisioning server. Note that reading this object can return upgradeFromMgt(1). This indicates that a software download is currently in progress, and that the device will reboot after successfully receiving an image." DEFVAL { allowProvisioningUpgrade } ::= { docsDevSoftware 3 } docsDevSwOperStatus OBJECT-TYPE SYNTAX INTEGER { inProgress(1), completeFromProvisioning(2), completeFromMgt(3), failed(4), other(5) } MAX-ACCESS read-only STATUS current DESCRIPTION "InProgress(1) indicates that a TFTP or HTTP download is underway, either as a result of a version mismatch at provisioning or as a result of a upgradeFromMgt request. Woundy & Marez Expires September 2, 2006 [Page 28] Internet-Draft DOCSIS Cable Device MIB March 2006 No other docsDevSw* objects can be modified while in this state. CompleteFromProvisioning(2) indicates that the last software upgrade was a result of version mismatch at provisioning. CompleteFromMgt(3) indicates that the last software upgrade was a result of setting docsDevSwAdminStatus to upgradeFromMgt. Failed(4) indicates that the last attempted download failed, ordinarily due to TFTP or HTTP timeout." REFERENCE "DOCSIS RFI 1.0 Specification, Section 8.2., and DOCSIS RFI 1.1 Specification, Section 10.1. and DOCSIS RFI 2.0 Specification, Section 12.1." ::= { docsDevSoftware 4 } docsDevSwCurrentVers OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The software version currently operating in this device. This string's syntax is that used by the individual vendor to identify software versions. For a CM, this string will describe the current software load. For a CMTS, this object SHOULD contain either a human readable representation of the vendor specific designation of the software for the chassis, or of the software for the control processor. If neither of these is applicable, the value MUST be a zero-length string." ::= { docsDevSoftware 5 } docsDevSwServerAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of address of the TFTP or HTTP server used for software upgrades. If docsDevSwServerTransportProtocol is currently set to tftp(1), attempting to set this object to dns(16) MUST result in an error." ::= { docsDevSoftware 6 } Woundy & Marez Expires September 2, 2006 [Page 29] Internet-Draft DOCSIS Cable Device MIB March 2006 docsDevSwServerAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The address of the TFTP or HTTP server used for software upgrades. If the TFTP/HTTP server is unknown, return the zero length address string (see the TextualConvention). If docsDevSwServer is also implemented in this agent, this object is tied to it. A set of this object to an IPv4 address will result in the value of docsDevSwServer also being set to that address. If this object is set to an IPv6 address, docsDevSwServer is set to 0.0.0.0. If docsDevSwServer is set, this object is also set to that value. Note that if both are set in the same action, the order of which one sets the other is undefined." ::= { docsDevSoftware 7 } docsDevSwServerTransportProtocol OBJECT-TYPE SYNTAX INTEGER { tftp(1), http(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object specifies the transport protocol (TFTP or HTTP) to be used for software upgrades. If the value of this object is tftp(1), then the cable device uses TFTP (RFC 1350) read request packets to download the docsDevSwFilename from the docsDevSwServerAddress in octet mode. If the value of this object is http(2), then the cable device uses HTTP 1.0 (RFC 1945) or HTTP 1.1 (RFC 2616) GET requests sent to host docsDevSwServerAddress to download the software image from path docsDevSwFilename. If docsDevSwServerAddressType is currently set to dns(16), attempting to set this object to tftp(1) MUST result in an error." DEFVAL { tftp } ::= { docsDevSoftware 8 } Woundy & Marez Expires September 2, 2006 [Page 30] Internet-Draft DOCSIS Cable Device MIB March 2006 -- -- The following group describes server access and parameters used -- for initial provisioning and bootstrapping. -- docsDevServer OBJECT IDENTIFIER ::= { docsDevMIBObjects 4 } docsDevServerBootState OBJECT-TYPE SYNTAX INTEGER { operational(1), disabled(2), waitingForDhcpOffer(3), waitingForDhcpResponse(4), waitingForTimeServer(5), waitingForTftp(6), refusedByCmts(7), forwardingDenied(8), other(9), unknown(10) } MAX-ACCESS read-only STATUS current DESCRIPTION "If operational(1), the device has completed loading and processing of configuration parameters and the CMTS has completed the Registration exchange. If disabled(2) then the device was administratively disabled, possibly by being refused network access in the configuration file. If waitingForDhcpOffer(3) then a Dynamic Host Configuration Protocol (DHCP) Discover has been transmitted and no offer has yet been received. If waitingForDhcpResponse(4) then a DHCP Request has been transmitted and no response has yet been received. If waitingForTimeServer(5) then a Time Request has been transmitted and no response has yet been received. If waitingForTftp(6) then a request to the TFTP parameter server has been made and no response received. If refusedByCmts(7) then the Registration Request/Response exchange with the CMTS failed. If forwardingDenied(8) then the registration process Woundy & Marez Expires September 2, 2006 [Page 31] Internet-Draft DOCSIS Cable Device MIB March 2006 completed, but the network access option in the received configuration file prohibits forwarding. If other(9) then the registration process reached a point that does not fall into one of the above categories. If unknown(10) then the device has not yet begun the registration process, or is in some other indeterminant state." REFERENCE "DOCSIS RFI 1.0 Specification, Figure 7-1, and DOCSIS RFI 1.1 Specification, Figure 9-1 and DOCSIS RFI 2.0 Specification, Figure 11-1." ::= { docsDevServer 1 } docsDevServerDhcp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address of the DHCP server that assigned an IP address to this device. Returns 0.0.0.0 if DHCP is not used for IP address assignment, or if this agent is not assigned an IPv4 address. This object is deprecated and is replaced by docsDevServerDhcpAddress." ::= { docsDevServer 2 } docsDevServerTime OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION "The IP address of the Time server (RFC 0868). Returns 0.0.0.0 if the time server IP address is unknown, or if the time server is not an IPv4 server. This object is deprecated and is replaced by docsDevServerTimeAddress." ::= { docsDevServer 3 } docsDevServerTftp OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS deprecated DESCRIPTION Woundy & Marez Expires September 2, 2006 [Page 32] Internet-Draft DOCSIS Cable Device MIB March 2006 "The IP address of the TFTP server responsible for downloading provisioning and configuration parameters to this device. Returns 0.0.0.0 if the TFTP server address is unknown or is not an IPv4 address. This object is deprecated and is replaced by docsDevServerConfigTftpAddress." ::= { docsDevServer 4 } docsDevServerConfigFile OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "The name of the device configuration file read from the TFTP server. Returns an zero-length string if the configuration file name is unknown." ::= { docsDevServer 5 } docsDevServerDhcpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address of docsDevServerDhcpAddress. If DHCP was not used, this value should return unknown(0)." ::= { docsDevServer 6 } docsDevServerDhcpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The internet address of the DHCP server that assigned an IP address to this device. Returns the zero length octet string if DHCP was not used for IP address assignment." ::= { docsDevServer 7 } docsDevServerTimeAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address of docsDevServerTimeAddress. If no time server exists, this value should return unknown(0)." Woundy & Marez Expires September 2, 2006 [Page 33] Internet-Draft DOCSIS Cable Device MIB March 2006 ::= { docsDevServer 8 } docsDevServerTimeAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The Internet address of the RFC 868 Time server as provided by DHCP option 4. Note that if multiple values are provided to the CM in DHCP option 4, the value of this MIB object MUST be the Time server address from which the Time of Day reference was acquired based on the DOCSIS RFI specification. During the period of time where the Time of Day have not been acquired, the Time server address reported by the CM may report the first address value in the DHCP option value or the last server address the CM attempted to get the Time of day value. Returns the zero length octet string if the time server IP address is not provisioned." REFERENCE "DOCSIS RFI 1.1 Specification, Section 9.2.7. and DOCSIS RFI 2.0 Specification, Section 11.2.7." ::= { docsDevServer 9 } docsDevServerConfigTftpAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-only STATUS current DESCRIPTION "The type of address of docsDevServerConfigTftpAddress. If no TFTP server exists, this value should return unknown(0)." ::= { docsDevServer 10 } docsDevServerConfigTftpAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The internet address of the TFTP server responsible for downloading provisioning and configuration parameters to this device. Returns the zero length octet string if the config server address is unknown. There are certain security risks that are involved with using TFTP." Woundy & Marez Expires September 2, 2006 [Page 34] Internet-Draft DOCSIS Cable Device MIB March 2006 REFERENCE "RFC 3617, Section 5" ::= { docsDevServer 11 } -- -- Event Reporting -- docsDevEvent OBJECT IDENTIFIER ::= { docsDevMIBObjects 5 } docsDevEvControl OBJECT-TYPE SYNTAX INTEGER { resetLog(1), useDefaultReporting(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "Setting this object to resetLog(1) empties the event log. All data is deleted. Setting it to useDefaultReporting(2) returns all event priorities to their factory-default reporting. Reading this object always returns useDefaultReporting(2)." ::= { docsDevEvent 1 } docsDevEvSyslog OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The IP address of the Syslog server. If 0.0.0.0, either syslog transmission is inhibited, or the Syslog server address is not an IPv4 address. This object is deprecated and is replaced by docsDevEvSyslogAddress." ::= { docsDevEvent 2 } docsDevEvThrottleAdminStatus OBJECT-TYPE SYNTAX INTEGER { unconstrained(1), maintainBelowThreshold(2), stopAtThreshold(3), inhibited(4) } MAX-ACCESS read-write STATUS current Woundy & Marez Expires September 2, 2006 [Page 35] Internet-Draft DOCSIS Cable Device MIB March 2006 DESCRIPTION "Controls the transmission of traps and syslog messages with respect to the trap pacing threshold. unconstrained(1) causes traps and syslog messages to be transmitted without regard to the threshold settings. maintainBelowThreshold(2) causes trap transmission and syslog messages to be suppressed if the number of traps would otherwise exceed the threshold. stopAtThreshold(3) causes trap transmission to cease at the threshold, and not resume until directed to do so. inhibited(4) causes all trap transmission and syslog messages to be suppressed. A single event is always treated as a single event for threshold counting. That is, an event causing both a trap and a syslog message is still treated as a single event. Writing to this object resets the thresholding state." DEFVAL { unconstrained } ::= { docsDevEvent 3 } docsDevEvThrottleInhibited OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS deprecated DESCRIPTION "If true(1), trap and syslog transmission is currently inhibited due to thresholds and/or the current setting of docsDevEvThrottleAdminStatus. In addition, this is true(1) when transmission is inhibited due to no syslog (docsDevEvSyslog) or trap (docsDevNmAccessEntry) destinations having been set. This object is deprecated and is replaced by docsDevEvThrottleThresholdExceeded." ::= { docsDevEvent 4 } docsDevEvThrottleThreshold OBJECT-TYPE SYNTAX Unsigned32 UNITS "events" MAX-ACCESS read-write STATUS current DESCRIPTION Woundy & Marez Expires September 2, 2006 [Page 36] Internet-Draft DOCSIS Cable Device MIB March 2006 "Number of events per docsDevEvThrottleInterval permitted before throttling is to occur. A single event, whether the notification could result in messages transmitted using syslog, SNMP, or both protocols, and regardless of the number of destinations, (including zero) is always treated as a single event for threshold counting. For example, an event causing both a trap and a syslog message is still treated as a single event. All system notifications that occur within the device should be taken into consideration when calculating and monitoring the threshold." DEFVAL { 0 } ::= { docsDevEvent 5 } docsDevEvThrottleInterval OBJECT-TYPE SYNTAX Integer32 (1..2147483647) UNITS "seconds" MAX-ACCESS read-write STATUS current DESCRIPTION "The interval over which docsDevEvThrottleThreshold applies." DEFVAL { 1 } ::= { docsDevEvent 6 } -- -- The following table controls the reporting of the various classes -- of events. -- docsDevEvControlTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsDevEvControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "This table allows control of the reporting of event classes. For each event priority, a combination of logging and reporting mechanisms may be chosen. The mapping of event types to priorities is vendor-dependent. Vendors may also choose to allow the user to control that mapping through proprietary means. Table entries MUST persist across reboots for CMTS devices and MUST NOT persist across reboots for CM devices." ::= { docsDevEvent 7 } Woundy & Marez Expires September 2, 2006 [Page 37] Internet-Draft DOCSIS Cable Device MIB March 2006 docsDevEvControlEntry OBJECT-TYPE SYNTAX DocsDevEvControlEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Allows configuration of the reporting mechanisms for a particular event priority." INDEX { docsDevEvPriority } ::= { docsDevEvControlTable 1 } DocsDevEvControlEntry ::= SEQUENCE { docsDevEvPriority INTEGER, docsDevEvReporting BITS } docsDevEvPriority OBJECT-TYPE SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), information(7), debug(8) } MAX-ACCESS not-accessible STATUS current DESCRIPTION "The priority level that is controlled by this entry. These are ordered from most (emergency) to least (debug) critical. Each event with a CM or CMTS has a particular priority level associated with it (as defined by the vendor). emergency(1) events indicate vendor-specific fatal hardware or software errors that prevent normal system operation. alert(2) events indicate a serious failure which causes the reporting system to reboot but is not caused by hardware or software malfunctioning. critical(3) events indicate a serious failure that requires attention and prevents the device from transmitting data but could be recovered without rebooting the system. Woundy & Marez Expires September 2, 2006 [Page 38] Internet-Draft DOCSIS Cable Device MIB March 2006 error(4) and warning(5) events indicate a failure occurred that could interrupt the normal data flow but does not cause the device to re-register. notice(6) and information(7) events indicate a milestone or checkpoint in normal operation that could be of particular importance when troubleshooting. debug(8) events are reserved for vendor-specific events. During normal operation no event more critical than notice(6) should be generated. Events between warning and emergency should be generated at appropriate levels of problems (e.g. emergency when the box is about to crash)." ::= { docsDevEvControlEntry 1 } docsDevEvReporting OBJECT-TYPE SYNTAX BITS { local(0), traps(1), syslog(2), -- The following are extensions to the original set of -- labels. The extensions start at an octet boundary. So -- for bits 3-7, one MUST set them to zero on send and -- one MUST ignore them on receipt. localVolatile(8), stdInterface(9) } MAX-ACCESS read-write STATUS current DESCRIPTION "Defines the action to be taken on occurrence of this event class. Implementations may not necessarily support all options for all event classes, but at minimum must allow traps and syslogging to be disabled. If the local(0) bit is set, then log to the internal log and update non-volatile store, for backward compatibility with the original RFC 2669 definition. If the traps(1) bit is set, then generate an SNMP trap, and if the syslog(2) bit is set, then send a syslog message (assuming the syslog address is set). If the localVolatile(8) bit is set, then log to the internal log without updating non-volatile store. If the stdInterface(9) bit is set, then the Woundy & Marez Expires September 2, 2006 [Page 39] Internet-Draft DOCSIS Cable Device MIB March 2006 agent ignores all other bits except the local(0), syslog(2) and localVolatile(8) bits. Setting the stdInterface(9) bit indicates that RFC3413 and RFC3014 are being used to control event reporting mechanisms." ::= { docsDevEvControlEntry 2 } docsDevEventTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsDevEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Contains a log of network and device events that may be of interest in fault isolation and troubleshooting. If the local(0) bit is set in docsDevEvReporting, entries in this table MUST persist across reboots." ::= { docsDevEvent 8 } docsDevEventEntry OBJECT-TYPE SYNTAX DocsDevEventEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes a network or device event that may be of interest in fault isolation and troubleshooting. Multiple sequential identical events are represented by incrementing docsDevEvCounts and setting docsDevEvLastTime to the current time rather than creating multiple rows. Entries are created with the first occurrence of an event. docsDevEvControl can be used to clear the table. Individual events can not be deleted." INDEX { docsDevEvIndex } ::= { docsDevEventTable 1 } DocsDevEventEntry ::= SEQUENCE { docsDevEvIndex Integer32, docsDevEvFirstTime DateAndTime, docsDevEvLastTime DateAndTime, docsDevEvCounts Counter32, docsDevEvLevel INTEGER, docsDevEvId Unsigned32, docsDevEvText SnmpAdminString } docsDevEvIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) Woundy & Marez Expires September 2, 2006 [Page 40] Internet-Draft DOCSIS Cable Device MIB March 2006 MAX-ACCESS not-accessible STATUS current DESCRIPTION "Provides relative ordering of the objects in the event log. This object will always increase except when (a) the log is reset via docsDevEvControl, (b) the device reboots and does not implement non-volatile storage for this log, or (c) it reaches the value 2^31. The next entry for all the above cases is 1." ::= { docsDevEventEntry 1 } docsDevEvFirstTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "The value of docsDevDateTime at the time this entry was created." ::= { docsDevEventEntry 2 } docsDevEvLastTime OBJECT-TYPE SYNTAX DateAndTime MAX-ACCESS read-only STATUS current DESCRIPTION "When an entry reports only one event, this object will have the same value as the corresponding instance of docsDevEvFirstTime. When an entry reports multiple events, this object will record the value that docsDevDateTime had when the most recent event for this entry occurred." ::= { docsDevEventEntry 3 } -- This object was renamed from docsDevEvCount to meet naming -- requirements for Counter32 docsDevEvCounts OBJECT-TYPE SYNTAX Counter32 UNITS "events" MAX-ACCESS read-only STATUS current DESCRIPTION "The number of consecutive event instances reported by this entry. This starts at 1 with the creation of this row and increments by 1 for each subsequent duplicate event." ::= { docsDevEventEntry 4 } Woundy & Marez Expires September 2, 2006 [Page 41] Internet-Draft DOCSIS Cable Device MIB March 2006 docsDevEvLevel OBJECT-TYPE SYNTAX INTEGER { emergency(1), alert(2), critical(3), error(4), warning(5), notice(6), information(7), debug(8) } MAX-ACCESS read-only STATUS current DESCRIPTION "The priority level of this event as defined by the vendor. These are ordered from most serious (emergency) to least serious (debug). emergency(1) events indicate vendor-specific fatal hardware or software errors that prevent normal system operation. alert(2) events indicate a serious failure which causes the reporting system to reboot but is not caused by hardware or software malfunctioning. critical(3) events indicate a serious failure that requires attention and prevents the device from transmitting data but could be recovered without rebooting the system. error(4) and warning(5) events indicate a failure occurred that could interrupt the normal data flow but does not cause the device to re-register. notice(6) and information(7) events indicate a milestone or checkpoint in normal operation that could be of particular importance when troubleshooting. debug(8) events are reserved for vendor-specific events. During normal operation no event more critical than notice(6) should be generated. Events between warning and emergency should be generated at appropriate levels of problems (e.g. emergency when the box is about to crash)." ::= { docsDevEventEntry 5 } Woundy & Marez Expires September 2, 2006 [Page 42] Internet-Draft DOCSIS Cable Device MIB March 2006 -- -- It is strongly recommended that implementors follow the CableLabs -- enumerations for docsDevEvId, per the DOCSIS OSSIv1.1 spec -- and follow-on specifications. -- docsDevEvId OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "For this product, uniquely identifies the type of event that is reported by this entry." REFERENCE "DOCSIS OSSI 1.1 Specification, Appendix H and DOCSIS OSSI 2.0 Specification, Annex D." ::= { docsDevEventEntry 6 } docsDevEvText OBJECT-TYPE SYNTAX SnmpAdminString MAX-ACCESS read-only STATUS current DESCRIPTION "Provides a human-readable description of the event, including all relevant context (interface numbers, etc.)." ::= { docsDevEventEntry 7 } docsDevEvSyslogAddressType OBJECT-TYPE SYNTAX InetAddressType MAX-ACCESS read-write STATUS current DESCRIPTION "The type of address of docsDevEvSyslogAddress. If no syslog server exists, this value should return unknown(0)." DEFVAL { unknown } ::= { docsDevEvent 9 } docsDevEvSyslogAddress OBJECT-TYPE SYNTAX InetAddress MAX-ACCESS read-write STATUS current DESCRIPTION "The Internet address of the Syslog server as provided by DHCP option 7 or set via SNMP management. If the address of the server is set to any of the zero length string, the 0.0.0.0 IPv4 address or the 0: IPv6 address, Woundy & Marez Expires September 2, 2006 [Page 43] Internet-Draft DOCSIS Cable Device MIB March 2006 Syslog transmission is inhibited. Note that if multiple values are provided to the CM in DHCP option 7, the value of this MIB object MUST be the first Syslog server address received. By default at agent boot, this object returns the zero length string." ::= { docsDevEvent 10 } docsDevEvThrottleThresholdExceeded OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "If true(1), trap and syslog transmission is currently inhibited due to exceeding the trap/syslog event threshold in the current interval." ::= { docsDevEvent 11 } -- -- Link Level Control Filtering -- docsDevFilter OBJECT IDENTIFIER ::= { docsDevMIBObjects 6 } docsDevFilterLLCUnmatchedAction OBJECT-TYPE SYNTAX INTEGER { discard(1), accept(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "LLC (Link Level Control) filters can be defined on an inclusive or exclusive basis: CMs can be configured to forward only packets matching a set of layer three protocols, or to drop packets matching a set of layer three protocols. Typical use of these filters is to filter out possibly harmful (given the context of a large metropolitan LAN) protocols. If set to discard(1), any L2 packet which does not match at least one filter in the docsDevFilterLLCTable will be discarded. If set to accept(2), any L2 packet which does not match at least one filter in the docsDevFilterLLCTable will be accepted for further processing (e.g., bridging). In other words, if the Woundy & Marez Expires September 2, 2006 [Page 44] Internet-Draft DOCSIS Cable Device MIB March 2006 packet does not match an entry in the table it takes this action, if it does match an entry in the table it takes the opposite of this action." DEFVAL { accept } ::= { docsDevFilter 1 } docsDevFilterLLCTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsDevFilterLLCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A list of filters to apply to (bridged) LLC traffic. The filters in this table are applied to incoming traffic on the appropriate interface(s) prior to any further processing (e.g. before handing the packet off for level 3 processing, or for bridging). The specific action taken when no filter is matched is controlled by docsDevFilterLLCUnmatchedAction. Table entries MUST NOT persist across reboots for any device." ::= { docsDevFilter 2 } docsDevFilterLLCEntry OBJECT-TYPE SYNTAX DocsDevFilterLLCEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Describes a single filter to apply to (bridged) LLC traffic received on a specified interface. " INDEX { docsDevFilterLLCIndex } ::= { docsDevFilterLLCTable 1 } DocsDevFilterLLCEntry ::= SEQUENCE { docsDevFilterLLCIndex Integer32, docsDevFilterLLCStatus RowStatus, docsDevFilterLLCIfIndex InterfaceIndexOrZero, docsDevFilterLLCProtocolType INTEGER, docsDevFilterLLCProtocol Integer32, docsDevFilterLLCMatches Counter32 } docsDevFilterLLCIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS current DESCRIPTION "Index used for the identification of filters (note that LLC filter order is irrelevant)." ::= { docsDevFilterLLCEntry 1 } Woundy & Marez Expires September 2, 2006 [Page 45] Internet-Draft DOCSIS Cable Device MIB March 2006 docsDevFilterLLCStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION "Controls and reflects the status of rows in this table. There is no restriction on changing any of the associated columns for this row while this object is set to active. Specifying only this object (with the appropriate index) on a CM is sufficient to create a filter row which matches all inbound packets on the ethernet interface, and results in the packets being discarded. docsDevFilterLLCIfIndex (at least) must be specified on a CMTS to create a row." ::= { docsDevFilterLLCEntry 2} docsDevFilterLLCIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS current DESCRIPTION "The entry interface to which this filter applies. The value corresponds to ifIndex for either a CATV MAC or another network interface. If the value is zero, the filter applies to all interfaces. In Cable Modems, the default value is the customer side interface(s). In CMTSs, this object has to be specified to create a row in this table. Note that according to the DOCSIS OSSIv1.1 specification, ifIndex '1' in the CM means that this row applies to all Cable Modem to CPE Interfaces (CMCI)." REFERENCE "DOCSIS OSSI 1.1 Specification, Section 3.3.4.1. and DOCSIS OSSI 2.0 Specification, Section 6.3.4.1." ::= { docsDevFilterLLCEntry 3 } docsDevFilterLLCProtocolType OBJECT-TYPE SYNTAX INTEGER { ethertype(1), dsap(2) } MAX-ACCESS read-create STATUS current DESCRIPTION Woundy & Marez Expires September 2, 2006 [Page 46] Internet-Draft DOCSIS Cable Device MIB March 2006 "The format of the value in docsDevFilterLLCProtocol: either a two-byte Ethernet Ethertype, or a one-byte 802.2 Service Access Point (SAP) value. ethertype(1) also applies to Standard Network Access Protocol (SNAP) encapsulated frames." DEFVAL { ethertype } ::= { docsDevFilterLLCEntry 4 } docsDevFilterLLCProtocol OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS current DESCRIPTION "The layer three protocol for which this filter applies. The protocol value format depends on docsDevFilterLLCProtocolType. Note that for SNAP frames, ethertype filtering is performed rather than Destination Service Access Point (DSAP) =0xAA." DEFVAL { 0 } ::= { docsDevFilterLLCEntry 5 } docsDevFilterLLCMatches OBJECT-TYPE SYNTAX Counter32 UNITS "matches" MAX-ACCESS read-only STATUS current DESCRIPTION "Counts the number of times this filter was matched." ::= { docsDevFilterLLCEntry 6 } -- -- IPv4 Filtering -- docsDevFilterIpDefault OBJECT-TYPE SYNTAX INTEGER { discard(1), accept(2) } MAX-ACCESS read-write STATUS deprecated DESCRIPTION "The default behavior for (bridged) packets that do not match IP filters (nor Internet filters if implemented) is defined by docsDevFilterIpDefault. If set to discard(1), all packets not matching an IP filter in docsDevFilterIpTable will be discarded. If Woundy & Marez Expires September 2, 2006 [Page 47] Internet-Draft DOCSIS Cable Device MIB March 2006 set to accept(2), all packets not matching an IP filter nor an Internet filter will be accepted for further processing (e.g., bridging)." DEFVAL { accept } ::= { docsDevFilter 3 } docsDevFilterIpTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsDevFilterIpEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An ordered list of filters or classifiers to apply to IP traffic. Filter application is ordered by the filter index, rather than by a best match algorithm (Note that this implies that the filter table may have gaps in the index values). Packets which match no filters will have policy 0 in the docsDevFilterPolicyTable applied to them if it exists. Otherwise, Packets which match no filters are discarded or forwarded according to the setting of docsDevFilterIpDefault. Any IP packet can theoretically match multiple rows of this table. When considering a packet, the table is scanned in row index order (e.g. filter 10 is checked before filter 20). If the packet matches that filter (which means that it matches ALL criteria for that row), actions appropriate to docsDevFilterIpControl and docsDevFilterPolicyId are taken. If the packet was discarded processing is complete. If docsDevFilterIpContinue is set to true, the filter comparison continues with the next row in the table looking for additional matches. If the packet matches no filter in the table, the packet is accepted or dropped for further processing based on the setting of docsDevFilterIpDefault. If the packet is accepted, the actions specified by policy group 0 (e.g. the rows in docsDevFilterPolicyTable which have a value of 0 for docsDevFilterPolicyId) are taken if that policy group exists. Logically, this table is consulted twice during the processing of any IP packet - once upon its acceptance from the L2 entity, and once upon its transmission to the L2 entity. In actuality, for cable modems, IP filtering is generally the only IP processing done for transit traffic. This means that inbound and outbound filtering can generally be done at the same time with Woundy & Marez Expires September 2, 2006 [Page 48] Internet-Draft DOCSIS Cable Device MIB March 2006 one pass through the filter table. The objects in this table are only accessible from cable devices which are not operating in DiffServ MIB mode (RFC 3289). See the conformance section for details. Note that some devices are required by other specifications, e.g. the DOCSIS OSSIv1.1 specification, to support the legacy SNMPv1/v2c docsDevFilter mode for backward compatibility. Table entries MUST NOT persist across reboots for any device. This table is deprecated. Instead, use the DiffServ MIB from RFC 3289." ::= { docsDevFilter 4 } docsDevFilterIpEntry OBJECT-TYPE SYNTAX DocsDevFilterIpEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Describes a filter to apply to IP traffic received on a specified interface. All identity objects in this table (e.g. source and destination address/mask, protocol, source/dest port, TOS/mask, interface and direction) must match their respective fields in the packet for any given filter to match. To create an entry in this table, docsDevFilterIpIfIndex must be specified." INDEX { docsDevFilterIpIndex } ::= { docsDevFilterIpTable 1 } DocsDevFilterIpEntry ::= SEQUENCE { docsDevFilterIpIndex Integer32, docsDevFilterIpStatus RowStatus, docsDevFilterIpControl INTEGER, docsDevFilterIpIfIndex InterfaceIndexOrZero, docsDevFilterIpDirection INTEGER, docsDevFilterIpBroadcast TruthValue, docsDevFilterIpSaddr IpAddress, docsDevFilterIpSmask IpAddress, docsDevFilterIpDaddr IpAddress, docsDevFilterIpDmask IpAddress, docsDevFilterIpProtocol Integer32, docsDevFilterIpSourcePortLow Integer32, Woundy & Marez Expires September 2, 2006 [Page 49] Internet-Draft DOCSIS Cable Device MIB March 2006 docsDevFilterIpSourcePortHigh Integer32, docsDevFilterIpDestPortLow Integer32, docsDevFilterIpDestPortHigh Integer32, docsDevFilterIpMatches ZeroBasedCounter32, docsDevFilterIpTos OCTET STRING, docsDevFilterIpTosMask OCTET STRING, docsDevFilterIpContinue TruthValue, docsDevFilterIpPolicyId Integer32 } docsDevFilterIpIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Index used to order the application of filters. The filter with the lowest index is always applied first." ::= { docsDevFilterIpEntry 1 } docsDevFilterIpStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Controls and reflects the status of rows in this table. Specifying only this object (with the appropriate index) on a CM is sufficient to create a filter row which matches all inbound packets on the ethernet interface, and results in the packets being discarded. docsDevFilterIpIfIndex (at least) must be specified on a CMTS to create a row. Creation of the rows may be done via either create-and-wait or create-and-go, but the filter is not applied until this object is set to (or changes to) active. There is no restriction in changing any object in a row while this object is set to active." ::= { docsDevFilterIpEntry 2 } docsDevFilterIpControl OBJECT-TYPE SYNTAX INTEGER { discard(1), accept(2), policy(3) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION Woundy & Marez Expires September 2, 2006 [Page 50] Internet-Draft DOCSIS Cable Device MIB March 2006 "If set to discard(1), all packets matching this filter will be discarded and scanning of the remainder of the filter list will be aborted. If set to accept(2), all packets matching this filter will be accepted for further processing (e.g., bridging). If docsDevFilterIpContinue is set to true, see if there are other matches, otherwise done. If set to policy (3), execute the policy entries matched by docsDevFilterIpPolicyId in docsDevFilterPolicyTable. If docsDevFilterIpContinue is set to true, continue scanning the table for other matches, otherwise done." DEFVAL { discard } ::= { docsDevFilterIpEntry 3 } docsDevFilterIpIfIndex OBJECT-TYPE SYNTAX InterfaceIndexOrZero MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The entry interface to which this filter applies. The value corresponds to ifIndex for either a CATV MAC or another interface. If the value is zero, the filter applies to all interfaces. Default value in CMs is the index of the customer-side (e.g. ethernet) interface(s). In CMTSes, this object MUST be specified to create a row in this table. Note that according to the DOCSIS OSSIv1.1 specification, ifIndex '1' in the Cable Modem means that this row applies to all CMCI (customer-facing) interfaces." REFERENCE "DOCSIS OSSI 1.1 Specification, Section 3.3.4.1. and DOCSIS OSSI 2.0 Specification, Section 6.3.4.1." ::= { docsDevFilterIpEntry 4 } docsDevFilterIpDirection OBJECT-TYPE SYNTAX INTEGER { inbound(1), outbound(2), both(3) } MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Determines whether the filter is applied to inbound(1) Woundy & Marez Expires September 2, 2006 [Page 51] Internet-Draft DOCSIS Cable Device MIB March 2006 traffic, outbound(2) traffic, or traffic in both(3) directions." DEFVAL { inbound } ::= { docsDevFilterIpEntry 5 } docsDevFilterIpBroadcast OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS deprecated DESCRIPTION "If set to true(1), the filter only applies to multicast and broadcast traffic. If set to false(2), the filter applies to all traffic." DEFVAL { false } ::= { docsDevFilterIpEntry 6 } docsDevFilterIpSaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The source IP address, or portion thereof, that is to be matched for this filter. The source address is first masked (and'ed) against docsDevFilterIpSmask before being compared to this value. A value of 0 for this object and 0 for the mask matches all IP addresses." DEFVAL { '00000000'h } ::= { docsDevFilterIpEntry 7 } docsDevFilterIpSmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "A bit mask that is to be applied to the source address prior to matching. This mask is not necessarily the same as a subnet mask, but 1's bits must be leftmost and contiguous." DEFVAL { '00000000'h } ::= { docsDevFilterIpEntry 8 } docsDevFilterIpDaddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The destination IP address, or portion thereof, that is to be matched for this filter. The destination address Woundy & Marez Expires September 2, 2006 [Page 52] Internet-Draft DOCSIS Cable Device MIB March 2006 is first masked (and'ed) against docsDevFilterIpDmask before being compared to this value. A value of 00000000 for this object and 00000000 for the mask matches all IP addresses." DEFVAL { '00000000'h } ::= { docsDevFilterIpEntry 9 } docsDevFilterIpDmask OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-create STATUS deprecated DESCRIPTION "A bit mask that is to be applied to the destination address prior to matching. This mask is not necessarily the same as a subnet mask, but 1's bits MUST be leftmost and contiguous." DEFVAL { '00000000'h } ::= { docsDevFilterIpEntry 10 } docsDevFilterIpProtocol OBJECT-TYPE SYNTAX Integer32 (0..256) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The IP protocol value that is to be matched. For example: icmp is 1, tcp is 6, udp is 17. A value of 256 matches ANY protocol." REFERENCE "www.iana.org/assignments/protocol-numbers" DEFVAL { 256 } ::= { docsDevFilterIpEntry 11 } docsDevFilterIpSourcePortLow OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This is the inclusive lower bound of the transport-layer source port range that is to be matched. If the IP protocol of the packet is neither UDP nor TCP, this object is ignored during matching." REFERENCE "www.iana.org/assignments/port-numbers" DEFVAL { 0 } ::= { docsDevFilterIpEntry 12 } docsDevFilterIpSourcePortHigh OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS deprecated Woundy & Marez Expires September 2, 2006 [Page 53] Internet-Draft DOCSIS Cable Device MIB March 2006 DESCRIPTION "This is the inclusive upper bound of the transport-layer source port range that is to be matched. If the IP protocol of the packet is neither UDP nor TCP, this object is ignored during matching." REFERENCE "www.iana.org/assignments/port-numbers" DEFVAL { 65535 } ::= { docsDevFilterIpEntry 13 } docsDevFilterIpDestPortLow OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This is the inclusive lower bound of the transport-layer destination port range that is to be matched. If the IP protocol of the packet is neither UDP nor TCP, this object is ignored during matching." REFERENCE "www.iana.org/assignments/port-numbers" DEFVAL { 0 } ::= { docsDevFilterIpEntry 14 } docsDevFilterIpDestPortHigh OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This is the inclusive upper bound of the transport-layer destination port range that is to be matched. If the IP protocol of the packet is neither UDP nor TCP, this object is ignored during matching." REFERENCE "www.iana.org/assignments/port-numbers" DEFVAL { 65535 } ::= { docsDevFilterIpEntry 15 } docsDevFilterIpMatches OBJECT-TYPE SYNTAX ZeroBasedCounter32 UNITS "matches" MAX-ACCESS read-only STATUS deprecated DESCRIPTION "Counts the number of times this filter was matched. This object is initialized to 0 at boot, or at row creation, and is reset only upon reboot." ::= { docsDevFilterIpEntry 16 } docsDevFilterIpTos OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) Woundy & Marez Expires September 2, 2006 [Page 54] Internet-Draft DOCSIS Cable Device MIB March 2006 MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This is the value to be matched to the packet's TOS (Type of Service) value (after the TOS value is AND'd with docsDevFilterIpTosMask). A value for this object of 0 and a mask of 0 matches all TOS values." DEFVAL { '00'h } ::= { docsDevFilterIpEntry 17 } docsDevFilterIpTosMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The mask to be applied to the packet's TOS value before matching." DEFVAL { '00'h } ::= { docsDevFilterIpEntry 18 } docsDevFilterIpContinue OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-create STATUS deprecated DESCRIPTION "If this value is set to true, and docsDevFilterIpControl is anything but discard (1), continue scanning and applying policies. See section 3.3.3 for more details." DEFVAL { false } ::= { docsDevFilterIpEntry 19 } docsDevFilterIpPolicyId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object points to an entry in docsDevFilterPolicyTable. If docsDevFilterIpControl is set to policy (3), execute all matching policies in docsDevFilterPolicyTable. If no matching policy exists, treat as if docsDevFilterIpControl were set to accept (1). If this object is set to the value of 0, there is no matching policy, and docsDevFilterPolicyTable MUST NOT be consulted." DEFVAL { 0 } ::= { docsDevFilterIpEntry 20 } Woundy & Marez Expires September 2, 2006 [Page 55] Internet-Draft DOCSIS Cable Device MIB March 2006 -- -- Policy Mapping Table -- docsDevFilterPolicyTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsDevFilterPolicyEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A Table which maps between a policy group ID and a set of pointers to policies to be applied. All rows with the same docsDevFilterPolicyId are part of the same group of policy pointers, and are applied in the order in this table. docsDevFilterPolicyTable exists to allow multiple policy actions (referenced by policy pointers) to be applied to any given classified packet. The policy actions are applied in index order. For example: Index ID Type Action 1 1 TOS 1 9 5 TOS 1 12 1 IPSEC 3 This says that a packet which matches a filter with policy id 1, first has TOS policy 1 applied (which might set the TOS bits to enable a higher priority), and next has the IPSEC policy 3 applied (which may result in the packet being dumped into a secure VPN to a remote encryptor). Policy ID 0 is reserved for default actions and is applied only to packets which match no filters in docsDevFilterIpTable. Table entries MUST NOT persist across reboots for any device. This table is deprecated. Instead, use the DiffServ MIB from RFC 3289." ::= { docsDevFilter 5 } docsDevFilterPolicyEntry OBJECT-TYPE SYNTAX DocsDevFilterPolicyEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the docsDevFilterPolicyTable. Entries are Woundy & Marez Expires September 2, 2006 [Page 56] Internet-Draft DOCSIS Cable Device MIB March 2006 created by Network Management. To create an entry, docsDevFilterPolicyId MUST be specified." INDEX { docsDevFilterPolicyIndex } ::= { docsDevFilterPolicyTable 1 } DocsDevFilterPolicyEntry ::= SEQUENCE { docsDevFilterPolicyIndex Integer32, docsDevFilterPolicyId Integer32, -- docsDevFilterPolicyType INTEGER, -- docsDevFilterPolicyAction Integer32, docsDevFilterPolicyStatus RowStatus, docsDevFilterPolicyPtr RowPointer } docsDevFilterPolicyIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Index value for the table." ::= { docsDevFilterPolicyEntry 1 } docsDevFilterPolicyId OBJECT-TYPE SYNTAX Integer32 (0..2147483647) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Policy ID for this entry. A policy ID can apply to multiple rows of this table, all relevant policies are executed. Policy 0 (if populated) is applied to all packets which do not match any of the filters. N.B. If docsDevFilterIpPolicyId is set to 0, it DOES NOT match policy 0 of this table." ::= { docsDevFilterPolicyEntry 2 } -- The following two objects were removed and never used, however, -- to preserve OID numbering, they are simply commented out to -- to ensure that they are not used again. -- docsDevFilterPolicyType ::= { docsDevFilterPolicyEntry 3 } -- docsDevFilterPolicyAction ::= { docsDevFilterPolicyEntry 4 } docsDevFilterPolicyStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "Object used to create an entry in this table. There is no restriction in changing any object in a row while this object is set to active. Woundy & Marez Expires September 2, 2006 [Page 57] Internet-Draft DOCSIS Cable Device MIB March 2006 The following object MUST have a valid value before this object can be set to active: docsDevFilterPolicyPtr." ::= { docsDevFilterPolicyEntry 5 } docsDevFilterPolicyPtr OBJECT-TYPE SYNTAX RowPointer MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This object points to a row in an applicable filter policy table. Currently, the only standard policy table is docsDevFilterTosTable. Per the textual convention, this object points to the first accessible object in the row. E.g. to point to a row in docsDevFilterTosTable with an index of 21, the value of this object would be the object identifier docsDevTosStatus.21. Vendors are recommended to adhere to the same convention when adding vendor specific policy table extensions. If this pointer references an empty or non-existant row then no policy action is taken. The default upon row creation is a null pointer which results in no policy action being taken." DEFVAL { zeroDotZero } ::= { docsDevFilterPolicyEntry 6 } -- -- TOS Policy action table -- docsDevFilterTosTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsDevFilterTosEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "Table used to describe Type of Service (TOS) bits processing. This table is an adjunct to the docsDevFilterIpTable, and the docsDevFilterPolicy table. Entries in the latter table can point to specific rows in this (and other) tables and cause specific actions to be taken. This table permits the manipulation of the value of the Type of Service bits in the IP header of the matched Woundy & Marez Expires September 2, 2006 [Page 58] Internet-Draft DOCSIS Cable Device MIB March 2006 packet as follows: Set the tosBits of the packet to (tosBits & docsDevFilterTosAndMask) | docsDevFilterTosOrMask This construct allows you to do a clear and set of all the TOS bits in a flexible manner. Table entries MUST NOT persist across reboots for any device. This table is deprecated. Instead, use the DiffServ MIB from RFC 3289." ::= { docsDevFilter 6 } docsDevFilterTosEntry OBJECT-TYPE SYNTAX DocsDevFilterTosEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "A TOS policy entry." INDEX { docsDevFilterTosIndex } ::= { docsDevFilterTosTable 1 } DocsDevFilterTosEntry ::= SEQUENCE { docsDevFilterTosIndex Integer32, docsDevFilterTosStatus RowStatus, docsDevFilterTosAndMask OCTET STRING, docsDevFilterTosOrMask OCTET STRING } docsDevFilterTosIndex OBJECT-TYPE SYNTAX Integer32 (1..2147483647) MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "The unique index for this row. There are no ordering requirements for this table and any valid index may be specified." ::= { docsDevFilterTosEntry 1 } docsDevFilterTosStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-create STATUS deprecated DESCRIPTION "The object used to create and delete entries in this Woundy & Marez Expires September 2, 2006 [Page 59] Internet-Draft DOCSIS Cable Device MIB March 2006 table. A row created by specifying just this object results in a row which specifies no change to the TOS bits. A row may be created using either the create-and-go or create-and-wait paradigms. There is no restriction on the ability to change values in this row while the row is active." ::= { docsDevFilterTosEntry 2 } docsDevFilterTosAndMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This value is bitwise AND'd with the matched packet's TOS bits." DEFVAL { 'ff'h } ::= { docsDevFilterTosEntry 3 } docsDevFilterTosOrMask OBJECT-TYPE SYNTAX OCTET STRING (SIZE (1)) MAX-ACCESS read-create STATUS deprecated DESCRIPTION "This value is bitwise OR'd with the result from the AND procedure, (tosBits & docsDevFilterTosAndMask). The result then replaces the packet's TOS bits." DEFVAL { '00'h } ::= { docsDevFilterTosEntry 4 } -- -- CPE IP Management and anti spoofing group. Only implemented on -- Cable Modems. -- docsDevCpe OBJECT IDENTIFIER ::= { docsDevMIBObjects 7 } docsDevCpeEnroll OBJECT-TYPE SYNTAX INTEGER { none(1), any(2) } MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the population of docsDevFilterCpeTable. If set to none, the filters must be set manually by a network management action (either configuration Woundy & Marez Expires September 2, 2006 [Page 60] Internet-Draft DOCSIS Cable Device MIB March 2006 or SNMP set). If set to any, the CM wiretaps the packets originating from the ethernet and enrolls up to docsDevCpeIpMax addresses based on the source IPv4 or v6 addresses of those packets." DEFVAL { any } ::= { docsDevCpe 1 } docsDevCpeIpMax OBJECT-TYPE SYNTAX Integer32 (-1..2147483647) MAX-ACCESS read-write STATUS current DESCRIPTION "This object controls the maximum number of CPEs allowed to be learned behind this device. If set to zero, any number of CPEs may connect up to the maximum permitted for the device. If set to -1, no filtering is done on CPE source addresses, and no entries are made in the docsDevFilterCpeTable via learning. If an attempt is made to set this to a number greater than that permitted for the device, it is set to that maximum." DEFVAL { -1 } ::= { docsDevCpe 2 } docsDevCpeTable OBJECT-TYPE SYNTAX SEQUENCE OF DocsDevCpeEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "This table lists the IPv4 addresses seen (or permitted) as source addresses in packets originating from the customer interface on this device. In addition, this table can be provisioned with the specific addresses permitted for the CPEs via the normal row creation mechanisms. Table entries MUST NOT persist across reboots for any device. N.B. Management action can add entries in this table and in docsDevCpeIpTable past the value of docsDevCpeIpMax. docsDevCpeIpMax ONLY restricts the ability of the CM to automatically add learned addresses. This table is deprecated and is replaced by docsDevCpeInetTable." ::= { docsDevCpe 3 } Woundy & Marez Expires September 2, 2006 [Page 61] Internet-Draft DOCSIS Cable Device MIB March 2006 docsDevCpeEntry OBJECT-TYPE SYNTAX DocsDevCpeEntry MAX-ACCESS not-accessible STATUS deprecated DESCRIPTION "An entry in the docsDevFilterCpeTable. There is one entry for each IPv4 CPE seen or provisioned. If docsDevCpeIpMax is set to -1, this table is ignored, otherwise: Upon receipt of an IP packet from the customer interface of the CM, the source IP address is checked against this table. If the address is in the table, packet proces